Handyman on Call

How can they remove spilled glue from concrete?

Q. My husband spilled Gorilla Glue on the concrete entry to our house. We bought a product that was supposed to work but has made the mess worse. What now?

GUEST, in Hotton’s chat room

A. Blame hubby, every time, huh? That’s OK, we’re used to it. But what product made the big mess? If the glue is still soft, scrape off bits with a wide putty knife or chisel. If it is hard, sand or chisel it off. Soap and water is a good solvent, so try that first. Then paint thinner. How about acetone? Then power washing.


Q. I look at mounds of pine needles clogging my gutters. Do you have a solution other than removing the gutters that will eliminate my frequent trips up the ladder?

Get The Weekender in your inbox:
The Globe's top picks for what to see and do each weekend, in Boston and beyond.
Thank you for signing up! Sign up for more newsletters here

CRAIG, in Hotton’s chat room

A. It’s a perennial problem, so don’t expect much. I think Gutter Helmet claims its system of slots can keep needles out. All you can do is try. Meanwhile, enjoy the beauty of your evergreens.

Q. My Andersen double-hung double-glazed window exploded recently into a whole bunch of pieces. What can I do?



A. Regular glass, even insulated glass (with two panes of glass) in a regular position (not floor-to-ceiling or in a slider) rarely break into bits and pieces, but it can happen. So, call an Andersen dealer to replace the sash, not the whole window.

Some windows, in floor to ceiling positions and sliders, where it’s possible to walk right into them, a distinct hazard, are made of tempered glass, which explode into hundreds of small, dull-edged shards when hit or cut or abused in any way. It’s a safety feature.

Q. We recently replaced several 16-foot pressure-treated boards on our deck and have been given conflicting opinions as to whether or not we can stain them now or do we have to wait until six months has gone by before we stain them. These were replaced in mid-August.


A. Pressure-treated wood often feels wet and heavy because of the chemicals inserted under pressure. It is recommended to wait six months before staining them. Sometimes the wood feels dry, but it is a good idea to wait the recommended time. In the spring, when the weather is dry, apply one coat of a semitransparent stain. It will not peel, and will last up to five years. Caution: Apply only one coat.



Jim Grant of Beverly just read the Handyman’s column on using galvanized nails on red cedar clapboards. “My experience, zinc galvanized nails react with the tanins in cedar claps causing black stains. Stainless steel siding nails (with rings), while more expensive, will neither stain nor rust over time. Also, using 2 inch or longer nails driven into the studs behind the sheathing will anchor claps for pretty much eternity.”

Thanks, Jim, the point well taken.

Globe Handyman on Call also appears in the Sunday Real Estate section. He is available 1-6 p.m. Tuesdays to answer questions on house repair. Call 617-929-2930. Hotton ( also chats online about house matters 2-3 p.m. Thursdays. Go to